Cold hot oil pump, AY,end suction
AY Oil Pump
The technical parameter of type AY pump:
Capacity: Q:6.25~500m3/h
Head: H:60-300mm
The series centrifugal oil pump of type AY may be used in petroleum refining, petroleum chemical industry, etc. The pumps are suitable for pumping oil without solid particles or liquefied petroleum gas.
End suction oil pump
The temperature of the liquid usually is 20 ℃-105 ℃. The maximum working pressure of the pump is 1.6MPa, Inlet pressure cannot be over 0.6MPa.
Performance range
Capacity Q: 6.3-400m3/h
Head H: 5-125m
Construction
The pump is single -stage single-suction overhanging centrifugal pump. The pump is back pull-out type. It is unnecessary to disturb the inlet piping, outlet piping and pump casing, the impeller can be dismantled for maintenance. The shaft seal adopts packing seal or mechanical seal according to customers' requirements. The pump uses rolling bearings which get lubricated with dilute oil.
The direction of rotation
The rotation of the pump rotor is clockwise looking from the motor to the pump.
The material of main parts of the pump
The medium-contacting parts are made of alloy stainless steel, material No. ZG1Cr18Ni12Mo2Ti, etc.
